About
Contact Us
Privacy Policy

Drilling Course

Your Way to Drilling and Well Engineering

Home
Drilling Topics
Drilling Presentations
Well Control
Join Us

--------------------

Home › Contact Us

Contact Us

For any information please contact us on :

https://www.facebook.com/drillingcourse/

drillingcourse@gmail.com

0 Response to "Contact Us"

Post a Comment

Subscribe to: Posts (Atom)

Well Control - Courses & Tests -

Running Casing Instructions

Follow us on facebook

Drilling Course

Follow us On Twitter

Follow @CourseDrilling

Popular Posts

Drilling Rig Systems

Although drilling rigs differ greatly in outward appearance and method of deployment, all rotary rigs have the same basic dr...
Introduction to Drilling Bits

The drill bit is an important component in the drill string. The bit drills the rock in many mechanisms. The drilling bit is sel...
Rig Site Tips: Running Casing Procedures and Instructions

Running the Casing in the wellbore is an important issue when drilling an oil and gas well. An oil and gas well is drilled in...
Drill String Components

Introduction: The drillstring means the tubulars and the accessories used to run the drill bit to the bottom. The drill str...
Introduction to Casing

I-Introduction An oil and gas well is drilled in sections from the surface to the production zone. It is not possible to d...
Cementing Job Types

Primary Cementing Job The main objective of primary cementing is placing cement slurry behind the casing . This can be perfo...
Introduction to Stuck Pipe

A drillstring is considered stuck if it cannot be pulled out of the hole. There are two main types of sticking mechanisms: dif...
Drilling Rigs Types

Rotary drilling rigs are used for most drilling operations today. The hole is drilled by rotating a bit and applying a downwar...
Introduction to Cementing

I- Introduction The cement is used as a sealing material while drilling an oil and gas well. Pumping cement behind the cas...
Bottom Hole Pressure Concept

Pressure Losses When pumping the drilling fluids through the circulating system, high level of pressure is lost. Actually, ...

Follow us On Facebook

Drilling Course

FOLLOW BY EMAIL

Enter your email address:

Delivered by FeedBurner

Your Articles of The Week

Choke Manifold Basics - Onshore -

There are many definitions of choke manifold. It can be defined as '' An arrangement of piping and special valves, called chokes. In...
Introduction to Casing

I-Introduction An oil and gas well is drilled in sections from the surface to the production zone. It is not possible to d...
Drilling Rig Systems

Although drilling rigs differ greatly in outward appearance and method of deployment, all rotary rigs have the same basic dr...
Drilling Rigs Types

Rotary drilling rigs are used for most drilling operations today. The hole is drilled by rotating a bit and applying a downwar...
Introduction to Cementing

I- Introduction The cement is used as a sealing material while drilling an oil and gas well. Pumping cement behind the cas...
Stick Slip: Basics & Corrective Actions

Drill string vibration is an inevitable phenomena. Severe vibration can be harmful for the downhole equipment ...
Introduction to Drilling Bits

The drill bit is an important component in the drill string. The bit drills the rock in many mechanisms. The drilling bit is sel...

Topics

Casing (7)
Cementing (6)
Directional Drilling (6)
Drilling Bits (9)
Drilling Calculations (10)
Drilling Equipment (13)
Drilling Fluids (15)
Drilling Problems (16)
Drilling Rigs (2)
Fishing (1)
Rig Site Tips (11)
Tests & Activities (31)
Well Control (43)

Copyright 2015-2022 Drilling Course

Powered by Blogger.com